Dell Z9100 EMC Networking with Isilon Front-End Deployment and Best Practices - Page 8
Hardware overview, 2.1 Dell EMC Networking S3048-ON, 2.4 Dell EMC PowerEdge R730xd
View all Dell Z9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2 2.1 Hardware overview This section briefly describes the hardware used to validate the deployment example in this guide. Appendix A contains a complete listing of hardware and components. Dell EMC Networking S3048-ON The Dell EMC Networking S3048-ON is a 1-Rack Unit (RU) switch with forty-eight 1GbE Base-T ports and four 10GbE SFP+ ports. In this guide, one S3048-ON supports management traffic in each rack. 2.2 Dell EMC Networking S3048-ON Dell EMC Networking S4048-ON The S4048-ON is a 1RU switch with forty-eight 10GbE SFP+ ports and six ports of 40GbE. In this guide, this switch is deployed as a leaf switch performing basic gateway functionality for attached Windows servers and Isilon nodes. 2.3 Dell EMC Networking S4048-ON Dell EMC Networking Z9100-ON The Dell EMC Networking Z9100-ON is a 1RU, multilayer switch with thirty-two ports supporting 10/25/40/50/100GbE as well as two 10GbE ports. The Z9100-ON is used as a spine in this guide. 2.4 Dell EMC Networking Z9100-ON Dell EMC PowerEdge R730xd The Dell EMC PowerEdge R730xd is a 2-RU, two-socket server platform. It allows up to 32 x 2.5" SSDs or HDDs with SAS, SATA, and NVMe support. In this guide, two R730xd servers are used to connect to the Isilon storage. 8 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0