Dell Z9100 EMC Networking with Isilon Front-End Deployment and Best Practices - Page 64
Show VLT brief, S4048-Leaf3#show ip route bgp, S4048-Leaf3#show vlt brief
View all Dell Z9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
S4048-Leaf3#show ip route bgp Destination Gateway ----------- ------- B EX 10.0.1.1/32 via 192.168.1.4 B EX 10.0.1.2/32 via 192.168.2.4 B EX 10.0.2.1/32 via 192.168.1.4 via 192.168.2.4 B EX 10.0.2.2/32 via 192.168.1.4 via 192.168.2.4 B EX 10.0.2.4/32 via 192.168.1.4 via 192.168.2.4 B EX 172.16.1.0/24 via 192.168.1.4 via 192.168.2.4 Dist/Metric ----------20/0 20/0 20/0 20/0 20/0 20/0 Last Change ----------00:21:22 00:21:22 00:21:22 00:21:22 00:20:27 00:21:22 Note: The command show ip route can also be used to verify the information above as well as static routes and direct connections. 8.2.3 Show VLT brief This command is used to validate VLT configuration status on leaf switches in this topology. The Inter-chassis link (ICL) Link Status, Heart Beat Status and VLT Peer Status must all be up. The role of one switch in the VLT pair is primary (not shown), and its peer switch is assigned the secondary role. Ensure peer routing is shown as enabled. S4048-Leaf3#show vlt brief VLT Domain Brief Domain ID: Role: Role Priority: ICL Link Status: HeartBeat Status: VLT Peer Status: Local Unit Id: Version: Local System MAC address: Remote System MAC address: Remote system version: Delay-Restore timer: Delay-Restore Abort Threshold: Peer-Routing : Peer-Routing-Timeout timer: Multicast peer-routing timeout: 127 Secondary 32768 Up Up Up 0 6(8) f4:8e:38:2e:a0:f7 f4:8e:38:2e:76:f7 6(8) 90 seconds 60 seconds Enabled 0 seconds 150 seconds 64 Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0