Denon AVR-5805CI Owners Manual - English - Page 100

Advanced Operation FUNCTION INPUT MODE DIRECT/STEREO POWER ZONE3/4/REC SELECT HOME THX CINEMA STANDARD INPUTMODE PHONES DIRECT/STEREO Multi-source recording / playback 2 Playing one source while recording another (REC OUT mode) 1 Press the ZONE3/4/REC SELECT button until "ZONE3 SOURCE" appears on the display. 2 With "ZONE3 SOURCE" displayed, turn the FUNCTION knob until "RECOUT SOURCE" appears on the display. • The REC indicator lights. DVD RECOUT SOURCE The function switches as shown below when the FUNCTION knob is turned. ZONE3 SOURCE ZONE3 TUNER ···· ZONE3 V.AUX RECOUT V.AUX RECOUT VCR-4 ···· RECOUT SOURCE 3 With "RECOUT SOURCE" displayed, turn the FUNCTION knob to select the source you wish to record. 4 Set the recording mode. • Start recording. For operating instructions, refer to the manual of the component on which you want to record. • To cancel, turn the FUNCTION knob and select "SOURCE". • Recording sources other than digital inputs selected in the REC OUT mode are also output from the ZONE3 audio/video terminals. • When the REC OUT mode is selected, the ZONE3 button on the remote control unit cannot be operated. 2 Recording Dolby Digital and DTS multi channel sources • With this set it is possible to record Dolby Digital and DTS multichannel signals converted into 2 channel analog signals. • The recording signals are output to the TAPE and VCR output terminals. • Down-mixed analog signals converted into digital signals are output from the OPTICAL 3, 4 and 5 digital output terminals at this time. 1 Press the ZONE3/4/REC SELECT button until "RECOUT SOURCE" appears on the display. 2 Press the INPUT MODE button to set the input mode according to the source to be played. 3 Press the DIRECT/STEREO button to set the surround mode. • The multichannel digital signals are down-mixed and output to the TAPE and VCR output terminals. 4 Set the recording mode. NOTE: • This function does not work when "5.2 ch / 5.3 ch" is set for the MAIN ZONE's channel setup. 100