Denon AVR-5805CI Owners Manual - English - Page 124

Advanced Setup - Part 1 2 Audio Delay (ZONE2) • Set the delay time the sound is synchronized with the picture which are output in ZONE2. 1 Press the CURSOR D or H button to select "Audio Delay" at the "Video Setup" menu, then press the ENTER button. • The "Audio Delay" screen appears. Setting the ZONE3 and ZONE4 tone control and channel level • Adjust the tone and channel level of the sound output from ZONE3 and ZONE4. 1 Press the CURSOR D or H button to select "Zone3/4 Tone/Ch Lev." at the "Zone Setup" menu, then press the ENTER button. • The "Zone3/4 Tone/Ch Lev." screen appears. 2 Press the CURSOR F or G button to set the delay time (0 ms ~ 200 ms). With a movie source, for example, adjust so that the movement of the actors' lips is synchronized with the sound. 3 Press the ENTER button to enter the setting. • The "Zone Setup" menu reappears. 2 Press the CURSOR D or H button to select the zone whose sound you want to adjust (ZONE3, ZONE4), then press the ENTER button. • Switch to the setting screen. Example: When "Zone3" is selected 3 Press the CURSOR D or H button to select the item to be set, then press the CURSOR F or G button to adjust the parameter. Bass: Adjust the tone for the bass. (The bass sound can be adjusted between -12 dB and +12 dB in steps of 2.0 dB.) Treble: Adjust the tone for the treble. (The treble sound can be adjusted between -12 dB and +12 dB in steps of 2.0 dB.) HPF: Set this to "ON" if your speakers do not have a very strong capacity for producing low bass. Using the high pass filter makes it possible to reduce distortion of the bass sound. Channel Level: Set so that the playback level is the same for the left and right channels. (The volume can adjusted between -12 dB and +12 dB in steps of 1.0 dB.) 4 Press the ENTER button. • The "Zone3/4 Tone/Ch Lev." screen reappears. Use the same procedure to make the settings for ZONE4. 124