Denon AVR-5805CI Owners Manual - English - Page 144
When Manual mode is selected
UPC - 081757507424
View all Denon AVR-5805CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Advanced Setup - Part 2 3 Press the CURSOR D or H button to select "Test Tone Start", then press the CURSOR F button to select "Yes". 4 When "Manual" mode is selected: Press the CURSOR D or H button to select the -2 speaker, then press the CURSOR F or G button to adjust all the speakers to the same volume. Example: "Manual" mode is selected. 4 When "Auto" mode is selected: Press the CURSOR F or G button to adjust all -1 the speakers to the same volume. • The test tones are emitted from each speaker in the following order, at 4 seconds intervals the first time and second time around, 2 seconds intervals the third time around and on: FL C FR SRA SRB 2spkrs SW SLA SLB SBL SBR SB 1spkr When the surround back speaker setting is set to "1spkr" for "Speaker Configuration", this is set to "SB". Example: When the volume is set to -11.5 dB while the test tone is being produced from the Front L ch speaker 5 Press the ENTER button to enter the setting. • The "Channel Level" screen reappears. • To cancel the settings, press the CURSOR F button to select "Level Clear" and "Yes" on the "Channel Level" screen, then make the settings again. The volume can be adjusted between -12.0 dB and +12.0 dB in units of 0.5 dB. 144