Denon AVR-5805CI Owners Manual - English - Page 96
Dsp Simulation, Standard, 7ch Stereo, Cursor, Surround, Parameter, User Mode, Stereo, Ch Sel/enter
![]() |
UPC - 081757507424
View all Denon AVR-5805CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Advanced Operation AMP USER MODE STEREO CH SEL/ENTER SURROUND PARAMETER STANDARD DSP SIMULATION 7CH STEREO CURSOR ZONE2 surround back speakers are only displayed when "7.1ch" is selected for the ZONE2 channel output setting at "Channel Setup". When the ZONE2 surround back speaker setting is set to "1spkr" for "Speaker Configuration", this is set to "SB". 4 Press the CURSOR F button to reduce the volume of the front channels, the CURSOR G button to reduce the volume of the rear channels. The fader function does not affect the SW channel. • The channel whose channel level is adjusted lowest can be faded to -12.0 dB using the fader function. • If the channel levels are adjusted separately after adjusting the fader, the fader adjustment values are cleared, so adjust the fader again. 2 Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) of ZONE2 together. Use it for example to adjust the balance of the sound from each position when multi-channel music sources are played. 1 Select the ZONE2 mode using the AMP button. 2 Press the CH SEL/ENTER button. • The "Channel Vol." screen appears. 3 Press the CURSOR D, H or CH SEL/ENTER button then select "Fader". The channel switches in the order shown below each time the CH SEL/ENTER button is pressed. FL C FR SW SR FADER SL SBL SBR 96
![](/manual_guide/products/denon-avr5805ci-owners-manual-english-9b6f0aa/96.png)