Denon AVR-5805CI Owners Manual - English - Page 58

Basic Operation STANDARD USER MODE SURROUND PARAMETER CINEMA USER MODE CINEMA ENTER SURROUND PARAMETER STANDARD MUSIC CURSOR PHONES ENTER CURSOR MUSIC DTS NEO:6 mode • Surround playback can be performed for the analog input and digital input 2 channel signals. 1 Press the STANDARD button to select "DTS NEO:6" mode. • The DTS NEO:6 indicator lights. The mode switches as shown below each time the STANDARD button is pressed. DOLBY PLIIx DTS NEO:6 2 Play a program source. lights 3 Press the SURROUND PARAMETER button. • The surround parameter menu appears. 6 Press the CURSOR F or G button to adjust the parameters setting. 7 Press the ENTER or SURROUND PARAMETER button to complete the setting. • Select "Default Yes" and press CURSOR F button to reset all the settings. • When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC II, DOLBY PRO LOGIC IIx, DTS NEO:6 modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby Surround mode switches automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS Surround. • The DTS NEO:6 Cinema or Music mode can be chosen directly by pressing the CINEMA or MUSIC button on the Remote control unit during playback in the DTS NEO:6 mode. 2 Surround parameters t 4 Press the CURSOR F or G button to select the play mode. DTS NEO:6 Mode: • Cinema: This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2 channel sources as with 6.1 channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, because the in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the surround (SL, SR and SB channels). • Music: This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder and are played directly so there is no loss of sound quality, and the effect of the surround signals output from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound field. 5 Press the CURSOR D or H button to select the various surround parameters. CENTER IMAGE (0.0 to 1.0: default 0.3): The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC mode has been added. 58