Denon AVR-5805CI Owners Manual - English - Page 44

Basic Operation SOURCE FUNCTION MATER VOLUME HOME THX CINEMA VIDEO ON/OFF VIDEO SELECT SCALE SURROUND SPEAKER PHONES MONITOR SELECT ROOM EQ ROOM EQ SPEAKER VIDEO SELECT MUTE FUNCTION HOME THX CINEMA MATER VOLUME Playing the input source 1 Select the input source to be played. • The input source indicator lights. Example: CD (Main unit) (Remote control unit) To select the input source when ZONE2 SELECT, ZONE3/4/REC SELECT or TUNING PRESET is selected, press the SOURCE button on the main unit then operate the FUNCTION konb. 2 Start playback on the selected component. For operating instructions, refer to the component's manual. 3 Adjust the volume. The volume can be adjusted within the range of -80.0 to +18.0 dB, in steps of 0.5 dB. However, when the channel level is set ( page 64, 65 or 134), if the volume for any channel is set at +0.5 dB or greater, the volume cannot be adjusted up to 18.0 dB. (In this case the maximum volume adjustment range is "18.0 dB - (Maximum value of channel level)".) Also, you may not be able to adjust the volume to the maximum of 18.0 dB when internal volume compensation control is activated due to the combination of the surround mode and parameters, downmixing from multi-channel audio signals into two channels, etc. 2 To choose the surround sound mode Example: HOME THX CINEMA Press the HOME THX CINEMA button. For more information about the surround modes ( page 51 ~ 53). (Main unit) (Remote control unit) M.VOL. -80.0dB 2 To select the Room EQ function Press the ROOM EQ button. For more information about the Room EQ function ( page 48). The volume level is displayed on the master volume indicator. 44