Denon AVR-5805CI Owners Manual - English - Page 62
Surround Parameter, Cursor
UPC - 081757507424
View all Denon AVR-5805CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Basic Operation SURROUND PARAMETER CURSOR TONE DEFEAT ENTER SURROUND TONE CONTROL BACK ENTER SURROUND PARAMETER CURSOR 2 Surround parameters y EFFECT: This parameter turns the effect signals with multi surround mode speaker effects on and off in the WIDE SCREEN mode. When this parameter is turned off, the SBL and SBR channel signals are equivalent to the SL and SR channels, respectively. LEVEL: This parameter sets the strength of the effect signals in the WIDE SCREEN mode. It can be set in 15 steps, from "1" to "15". Set this to a low level if the positioning or phase of the surround signals sounds unnatural. SB CH OUT: • ON: Playback is conducted using the surround back speaker. • OFF: Playback is conducted without using the surround back speaker. This operation can be performed directly pressing the SURROUND BACK button on the main unit's panel. ROOM SIZE: This sets the size of the sound field. There are five settings: "small", "med.s" (medium-small), "medium", "med.l" (medium-large) and "large". "small" recreates a small sound field, "large" a large sound field. The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual size of the listening room. EFFECT LEVEL: This sets the strength of the surround effect. The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted. DELAY TIME: In the matrix mode only, the delay time can be set within the range of 0 to 300 ms. Tone control setting • Use the tone control setting to adjust the bass and treble as desired. • The tone control function will not work in the PURE DIRECT, DIRECT or Home THX Cinema mode. 2 Adjusting the tone from the remote control unit 1 Press the SURROUND PARAMETER button. • The surround parameter menu appears. The screen selected surround mode appears. 2 Press the CURSOR D or H button to select "TONE". 3 Press the CURSOR F button. • Switch to the "Total Control" screen. 62