Denon AVR-5805CI Owners Manual - English - Page 85

2 Registering 1 Press and hold the RC SETUP button for at least 3 seconds. • The IR segment blinks twice. 2 Press the 9, 7, 8 button (9 → 7 → 8) in that order. • The IR segment blinks twice and the system call registration mode is set. 3 Press the SYSTEM CALL button (1, 2 or 3) for which you want to register the operations. 4 Press the buttons you want to register in the order of the operations to be performed. Example:Press the ON button. ↓ Press the CD button of the MODE SELECTOR button. ↓ Press the 1 button. The mode can be switched by pressing a MODE SELECTOR button. 5 Repeat steps 3, 4 to register the desired buttons. 6 Press and hold the RC SETUP button for at least 3 seconds. • The IR segment blinks twice and the setting is completed. 2 Operating 1 Press the AMP button to select "SYSTEM CALL". 2 Press the SYSTEM CALL button (1, 2 or 3) at which the operation are registered • The stored signals are transmitted successively. Setting the punch through function • CD, DVD or VCR mode buttons can be assigned to unused TV and SAT/CBL mode buttons. • For example, when DVD mode operations are assigned to TV mode buttons, the DVD mode can be operated while in the TV mode. 1 Press and hold the RC SETUP button for at least 3 seconds. • The IR segment blinks twice. Advanced Operation 2 Press the 9, 8, 4 button (9 → 8 → 4) in that order. • The IR segment blinks twice and the punch through setting mode is set. 3 Press the MODE SELECTOR button for the device to be punched through (CD, DVD or VCR). 4 Press the button to be punched through (1, 2, 6, 7, 8, 9 or 3). 5 Press the MODE SELECTOR button for the device to be punched through (TV or SAT/CBL). 6 Press and hold the RC SETUP button for at least 3 seconds. • The IR segment blinks twice and the setting is completed. Setting the back light's lighting time 1 Press and hold the RC SETUP button for at least 3 seconds • The IR segment blinks twice. 2 Press the 9, 7, 3 button (9 → 7 → 3) in that order. • The IR segment blinks twice and the backlight lighting time setting mode is set. 3 Press the NUMBER button of (1 to 5) you want to set the lighting time. • The IR segment blinks twice. Lighting time: 1 : 5 sec 2 : 10 sec (factory default) 3 : 15 sec 4 : 20 sec 5 : 25 sec Setting the brightness • The brightness of the display can be adjusted in 5 steps (Default : level 3). • First set the auto brightness adjustment setting to "OFF". 1 Press and hold the RC SETUP button for at least 3 seconds. • The IR segment blinks twice. 2 Press the CHANNEL button. • Press the + button to increase the brightness 1 step. • Press the - button to decrease the brightness 1 step. 85