Dewalt DCFS950P2 Instruction Manual - Page 12

Proper Hand Position Fig. F, Preparing the Tool Fig. A, Using the Trigger Lock-off Fig. G, Loading

Get Dewalt DCFS950P2 PDF manuals and user guides View all Dewalt DCFS950P2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

English Fig. E 13 14 Proper Hand Position (Fig. F) WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown. WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction. Proper hand position requires one hand on the handle 16 as shown in Fig. F. Fig. F Using the Trigger Lock-off (Fig. G) WARNING: To reduce the risk of serious personal injury, do not keep trigger depressed when tool is not in use. Keep the trigger lock-off switch LOCKED (Fig. G) when the tool is not in use. WARNING: To reduce the risk of serious personal injury, lock off trigger, disconnect battery pack from tool and remove staples from magazine before making adjustments. Each DeWALT stapler is equipped with a trigger lock-off 2 which when pushed to the right as shown in Figure G, prevents the tool from firing a staple by locking the trigger and bypassing power to the motor. Fig. G 2 16 Preparing the Tool (Fig. A) NOTICE: NEVER spray or in any other way apply lubricants or cleaning solvents inside the tool. This can seriously affect the life and performance of the tool. NOTE: The battery pack is not fully charged out of the carton. Follow instructions outlined (refer to Charging A Battery). 1. Read the Stapler Safety Warnings section of this manual. 2. Wear eye and ear protection. 3. Remove battery 14 from tool. 4. Ensure magazine 10 is empty of all fastners. 5. Check for smooth and proper operation of contact trip 7 and pusher assemblies. Do not use tool if either assembly is not functioning properly. NEVER use a tool that has the contact trip restrained in the actuated position. 6. Keep tool pointed away from yourself and others. 7. Insert fully charged battery pack. When the trigger lock-off is pressed to the left, the tool will be fully operational. The trigger lock-off should always be locked off whenever any adjustments are made or when tool is not in immediate use. NOTICE: Do not store tool with battery pack installed. To prevent damage to the pack and to ensure best battery life, store battery packs out of the tool or charger in a cool, dry location. Loading the Tool (Fig. H) WARNING: Keep the tool pointed away from yourself and others. WARNING: Never load staples with the contact trip or  trigger activated. WARNING: Always remove battery pack before loading or unloading staples. CAUTION: Keep fingers clear of pusher latch track to  prevent injury. WARNING: The trigger lock-off should always be engaged whenever any adjustments are made or when tool is not in use. WARNING: This stapler requires the use of DeWALT staples. 1. Turn the stapler upside down. 2. Slide the spring-loaded pusher 12 to the base of the magazine to lock it into place. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
ENGLISH
10
Fig. E
14
13
Proper Hand Position (Fig. F)
±
WARNING:
To reduce the risk of serious personal injury,
ALWAYS
use proper hand position as shown.
±
WARNING:
To reduce the risk of serious personal
injury,
ALWAYS
hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the handle 
16
as shown in Fig. F.
Fig. F
16
Preparing the Tool (Fig. A)
NOTICE: NEVER
spray or in
any other way apply lubricants
or cleaning solvents inside the
tool. This can seriously affect
the life and performance of
the tool.
NOTE:
The battery pack is not fully charged out of the
carton. Follow instructions outlined (refer to
Charging
A Battery
).
1. Read the
Stapler Safety Warnings
section of
this manual.
2. Wear eye and ear protection.
3. Remove battery 
14
from tool.
4. Ensure magazine 
10
is empty of all fastners.
5. Check for smooth and proper operation of contact
trip 
7
and pusher assemblies. Do not use tool if
either assembly is not functioning properly.
NEVER
use a tool that has the contact trip restrained in the
actuated position.
6. Keep tool pointed away from yourself and others.
7. Insert fully charged battery pack.
Using the Trigger Lock-off (Fig. G)
±
WARNING:
To reduce the risk of serious personal
injury, do not keep trigger depressed when tool is not
in use. Keep the trigger lock-off switch LOCKED (Fig. G)
when the tool is not in use.
±
WARNING:
To reduce the risk of serious personal
injury, lock off trigger, disconnect battery pack from
tool and remove staples from magazine before
making adjustments.
Each
D
E
WALT
stapler is equipped with a trigger lock-off 
 2 
which when pushed to the right as shown in Figure G,
prevents the tool from firing a staple by locking the trigger
and bypassing power to the motor.
Fig. G
2
When the trigger lock-off is pressed to the left, the tool will
be fully operational. The trigger lock-off should always be
locked off whenever any adjustments are made or when
tool is not in immediate use.
NOTICE:
Do not store tool with battery pack installed.
To prevent damage to the pack and to ensure best
battery life, store battery packs out of the tool or
charger in a cool, dry location.
Loading the Tool (Fig. H)
±
WARNING:
Keep the tool pointed away from yourself
and others.
±
WARNING:
Never load staples with the contact trip or
trigger activated.
±
WARNING:
Always remove battery pack before
loading or unloading staples.
±
CAUTION:
Keep fingers clear of pusher latch track to
prevent injury.
±
WARNING:
The trigger lock-off should always be
engaged whenever any adjustments are made or
when tool is not in use.
±
WARNING:
This stapler requires the use of
D
E
WALT
 staples.
1. Turn the stapler upside down.
2. Slide the spring-loaded pusher 
 12 
to the base of the
magazine to lock it into place.