Edimax AR-7186WnB Manual - Page 44
by ISP list
View all Edimax AR-7186WnB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
The following table describes the parameters in this page: Field Description Virtual path identifier (VPI) is the virtual path between two VPI points in an ATM network. Its valid value is between 0 and 255. Enter the correct VPI provided by your ISP. By default, VPI is set to 8. Virtual channel identifier (VCI) is the virtual channel between VCI two points in an ATM network. Its valid value is between 1 and 65535. Enter the correct VCI provided by your ISP. By default, VCI is set to 35. Connection You can select LLC or VC-Mux. In this example, the Type encapsulation mode is set to 1483 Bridged IP LLC. 5.3.3. Dynamic IP Address For configuration method, please refer to that of Auto setup by ISP list Select Auto setup by ISP list, click NEXT, and the page as shown in the following figure appears. 44