Edimax AR-7186WnB Manual - Page 46

PPPoE/PPPoA

Get Edimax AR-7186WnB PDF manuals and user guides View all Edimax AR-7186WnB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Field VPI is set to 8. Description Virtual channel identifier (VCI) is the virtual channel between VCI two points in an ATM network. Its valid value is between 1 and 65535. Enter the correct VCI provided by your ISP. By default, VCI is set to 35. IP Address Enter the IP address provided by your ISP. Subnet Enter the subnet mask provided by your ISP. Mask ISP Enter the default gateway provided by your ISP. Gateway Connection You can select LLC or VC-Mux. In this example, the Type encapsulation mode is set to 1483 Bridged IP LLC. 5.3.1. PPPoE/PPPoA Select PPPoE/PPPoA, click NEXT, and the page as shown in the following figure will appear. The following table describes the parameters in this page: Field Description Username Enter the username for PPPoE dial-up, which is provided by your ISP. Password Enter the password for PPPoE dial-up, which is provided by your ISP. VPI Virtual path identifier (VPI) is the virtual path between two points in an ATM network. Its valid value is between 0 and 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
46
Field
Description
VPI is set to
8
.
VCI
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is between 1
and 65535. Enter the correct VCI provided by your ISP. By
default, VCI is set to
35
.
IP Address
Enter the IP address provided by your ISP.
Subnet
Mask
Enter the subnet mask provided by your ISP.
ISP
Gateway
Enter the default gateway provided by your ISP.
Connection
Type
You can select
LLC
or
VC-Mux
. In this example, the
encapsulation mode is set to
1483 Bridged IP LLC
.
5.3.1.
PPPoE/PPPoA
Select
PPPoE/PPPoA
, click
NEXT
, and the page as shown in the following
figure will appear.
The following table describes the parameters in this page:
Field
Description
Username
Enter the username for PPPoE dial-up, which is provided by
your ISP.
Password
Enter the password for PPPoE dial-up, which is provided by
your ISP.
VPI
Virtual path identifier (VPI) is the virtual path between two
points in an ATM network. Its valid value is between 0 and