Edimax AR-7186WnB Manual - Page 55
IP Common Options
View all Edimax AR-7186WnB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Field Description Encapsulation You can choose PPPoE LLC, PPPoE VC-Mux, PPPoA LLC or PPPoA VC-Mux. IP Unnumbered Select Activated or Deactivated. Connection Setting Connection You can choose Always On (Recommended), Connect On-Demand or Connect Manually. TCP MSS Option You can set a TCP MSS value. The range is from 100 to 1452. The default is 1400. IP Common Options Default Route You can enable or disable default route. IPv4 Address Get IP Address You can choose Static or Dynamic. Static IP Address You can enter the IP address for dial-up, which is provided by your ISP. IP Subnet Mask The default is 255.255.255.255. Gateway You can enter the gateway IP for dial-up, which is provided by your ISP. TCP MTU Option You can set a TCP MTU value. The range is from 100 to 1500. The default is 1492. Select whether to enable Network Address Translation (NAT) function. If you do not enable NAT, NAT you must add a route on the uplink equipment, otherwise Internet access will fail. Normally NAT is enabled. Dynamic Route You can select RIP1, RIP2-B or RIP2-M. Direction You can select None, Both, IN Only or OUT Only. Multicast IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish membership in a multicast group. The ADSL Router supports both IGMP version 1 (IGMP v1) and IGMP version 2 (IGMP 55