Edimax AR-7186WnB Manual - Page 47
Interface Setup
View all Edimax AR-7186WnB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Field Description 255. Enter the correct VPI provided by your ISP. By default, VPI is set to 8. Virtual channel identifier (VCI) is the virtual channel between VCI two points in an ATM network. Its valid value is between 1 and 65535. Enter the correct VCI provided by your ISP. By default, VCI is set to 35. Connection You can select LLC or VC-Mux. In this example, the Type encapsulation mode is set to PPPoE LLC. After setting, click NEXT, the page as shown in the following figure appears. Click BACK to modify the settings. Click NEXT to save the settings. Click EXIT to cancel the settings. Note: After you saving the settings in the Quick Start page, you can view this wan connection settings in the Interface Setup > Internet page. 5.4. Interface Setup In the navigation bar, click Interface Setup. The Interface Setup page that is displayed contains Internet, LAN and Wireless. 5.4.1. Internet Choose Interface Setup > Internet. The Internet page that is displayed contains ATM VC, Qos, IPv4/IPv6 and Encapsulation. Click Internet pane, the page shown in the following figure appears. In this page, you can configure the WAN interface of your router. 47