Edimax AR-7186WnB Manual - Page 69

Field, Description, One-to-One, Many-to-One, Many-to-Many, Overload, Many-to-Many No Overload,

Get Edimax AR-7186WnB PDF manuals and user guides View all Edimax AR-7186WnB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

The following table describes the parameters of this page: Field Description The Virtual server rule index for this VC. You can specify Rule Index 10 rules in maximum. All the VCs with single IP will use the same Virtual Server rules. Rule Type Choose the One-to-One, Many-to-One, Many-to-Many Overload, Many-to-Many No Overload, or Server. Enter the local IP Address you plan to map to. Local Start Local Start/End IP is the starting local IP address and Local End IP is the IP ending local IP address. If the rule is for all local IPs, then the Start IP is 0.0.0.0 and the End IP is 255.255.255.255. Enter the public IP Address you want to use for NAT. Public Start/End Public Start IP is the starting public IP address and Public IP End IP is the ending public IP address. If you have a dynamic IP, enter 0.0.0.0 as the Public Start IP. 5.5.4. QoS The QoS provides better service of selected network traffic over various technologies. This function can be set based on the physical LAN ports or wireless interfaces under IPv4 or IPv6 version respectively. IP Version: IPv4 Choose Advanced Setup > QoS, the page shown in the following figure appears. 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
69
The following table describes the parameters of this page:
Field
Description
Rule Index
The Virtual server rule index for this VC. You can specify
10 rules in maximum. All the VCs with single IP will use
the same Virtual Server rules.
Rule Type
Choose the
One-to-One
,
Many-to-One
,
Many-to-Many
Overload
,
Many-to-Many No Overload
, or
Server
.
Local Start/End
IP
Enter the local IP Address you plan to map to. Local Start
IP is the starting local IP address and Local End IP is the
ending local IP address. If the rule is for all local IPs, then
the Start IP is
0.0.0.0
and the End IP is
255.255.255.255
.
Public Start/End
IP
Enter the public IP Address you want to use for NAT.
Public Start IP is the starting public IP address and Public
End IP is the ending public IP address. If you have a
dynamic IP, enter 0.0.0.0 as the Public Start IP.
5.5.4.
QoS
The QoS provides better service of selected network traffic over various
technologies. This function can be set based on the physical LAN ports or
wireless interfaces under IPv4 or IPv6 version respectively.
IP Version: IPv4
Choose
Advanced Setup
>
QoS
, the page shown in the following figure
appears.