Edimax AR-7186WnB Manual - Page 73
Field, Description, Quality of Service, Activated, Deactivated, QoS Settings Summary, Medium,
View all Edimax AR-7186WnB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
The following table describes the parameters of this page: Field Quality of Service Description IP Version Select IP version. In this example, the IP version is set to IPv6. QoS Select Activated or Deactivated. After activating QoS, you may set the upload bandwidth of the WAN interface. Summary Click the QoS Settings Summary button to view the table of Qos rules and actions. Rule Rule Index You may establish up to 16 QoS rules. Active You may select Activated or Deactivated. Activated must be selected to set QoS rules. Destination IPv6 The Destination MAC address of the rule. If data packets include the MAC address, the data packets are placed into the group. The Source MAC address of the rule. If data packets include Source IPv6 the MAC address, the data packets are placed into the group. DSCP Range DSCP Range is from 0 to 63. DSCP For a message matching the QoS rule, its DSCP value will Remarking be modified. Queue # Select Low, Medium, High or Highest. 73