Edimax AR-7186WnB Manual - Page 59
Use User Discovered DNS Server Only
View all Edimax AR-7186WnB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Field Physical Ports DNS Relay Primary DNS Server Secondary DNS Server Radvd Enable Radvd Mode Auto Prefix RA Flag Set DHCP6 Server DHCP6 Mode Description When no port is selected, the LAN PC can't get an IP from the router. You can choose Use Auto Discovered DNS Server Only or Use User Discovered DNS Server Only. If you select Auto Discovered, the router accepts the firstly-received DNS assignment from one of the PPPoA, PPPoE or MER enabled PVC(s) during the connection establishment. If select User Discovered, enter the IP addresses of the primary and secondary DNS servers. DNS server FOR wan and LAN DNS server FOR wan and LAN You may choose to enable or disable Radvd. The Router Advertisement Daemon (Radvd) is an open-source software product that implements link-local advertisements of IPv6 router addresses and IPv6 routing prefixes using the Neighbor Discovery Protocol (NDP). You may choose Auto or Manual. Select Enable or Disable. You may choose ManagedAddr or Other Config. You may choose to enable or disable DHCP6 Server. You may choose Auto or Manual for the DHCP6 Server. Dynamic Host Configuration Protocol (DHCP) allows the individual PC to obtain the TCP/IP configuration from the centralized DHCP server. You can configure this router as a DHCP server or disable it. The DHCP server can assign IP address, IP default gateway and DNS server to DHCP clients. This router can also act as a surrogate DHCP server (DHCP proxy) where it relays IP address assignment from an actual DHCP server to clients. You can enable or disable DHCP server or DHCP proxy. 59