Edimax EW-7438RPn Manual - Page 13

Note: This WPS button position on this access point is an example, different devices may have different WPS button positions. If the access point you wish to connect to does not have a hardware WPS button, you may be able to use its web configuration menu's WPS function to establish a connection. Alternatively, you can log in to this extender's web UI to set up the device (for more details, please refer to '2-1-2 Web Browser Quick Setup') When the extender detects the WPS signal from the root wireless access point, the following sequence of LED flashes will occur: Phase Phase 1 Phase 2 Phase 3 Phase 4 DONE WPS LED Sequence Blinks approximately 5 to 7 times Turns OFF Turn back ON solid Turns OFF Turn back ON solid Approximate Time 10 to 14 seconds 3 seconds 20 seconds 14 seconds Continuous WPS LED 11