Edimax EW-7438RPn Manual - Page 32
Enable LED OFF Mode
View all Edimax EW-7438RPn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Broadcast ESSID WMM CTS Protect TX Power Enable LED off mode setting is 'Short Preamble'. When set to 'enabled', every wireless device will be able to scan for and find this Wi-Fi extender; when set to 'disabled', only wireless clients that know the extender's exact SSID can connect to the extender. Setting this to 'disabled' will help improve security. Enable or disable Wireless Multi-Media. When enabled, the Wi-Fi extender will give priority to multimedia related network applications so they will have better performance. This feature provides CTS (Clear to Send) protection when transferring data. It's recommended to select 'Auto' for this option. Select wireless transmission power level, from 10% to 100%. When connected wireless clients are not too far from this Wi-Fi extender, then it is not necessary to select a higher power level. Higher power levels may allow other people to break into your wireless network when you have a bad password or no password. Enable or disable the Wi-Fi extender's LED lights. Check 'Enable LED OFF Mode' to set up LED behavior: Turn off all LED indicators: disable all LED lights Turn off all LED indicators except the power LED: all LED lights will be disabled, except the 'POWER' LED When you finish changing the settings on this page, click the 'APPLY' button. You'll see the following message: 30