Epson 1815p User's Guide - Page 56
Starting EasyMP
UPC - 010343858190
View all Epson 1815p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
note Use only the Epson 802.11a/b/g wireless module in the projector. If you see a message asking you to insert a LAN or memory card, check to make sure your 802.11 a/b/g module is properly inserted (see page 52). Starting EasyMP Before connecting to the projector, you have to switch it to EasyMP mode. Follow these steps: 1. Point the remote control at the projector and press the P Power button. 2. Press the EasyMP button on the remote control to select EasyMP as the source. You see this screen. The network settings appear in the lower left. 3. If you've already set up your computer and projector for the mode you want to use-Ad Hoc mode (also called computer-tocomputer mode) or Access Point mode (also called infrastructure mode)-skip to "Projecting Over a Network" on page 81. Otherwise, continue with the next section. 56 Presenting Through a Wireless Network