Epson ActionPrinter 3250 User Manual - Page 27
Printing a Test File, ESC/P2
View all Epson ActionPrinter 3250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Setting Up Your Application Software TO take full advantage at your printer's features, including ESC/P 2, choose one of the first four printers on the list below. If none of these is listed, contact your software manufacturer for an update that includes one of the four. Until you receive an update, choose another printer as close to the top of the list as possible. LQ-100 ActionPrinter 3250 LQ-570 LQ-870 LQ-510/550 LQ-860 LQ-850 LQ-200 LQ-500 LQ-2550 LQ-2500 LQ-800 LQ-1500 ESC/P2 ESC/P If none of these printers is listed among your program's options, select the first available of the following: EX, FX, LX, RX, MX, Epson printer, Standard printer, Draft printer. Because these are 9-pin printers, however, your graphics printing may not be correct. Printing a test file After you select the most appropriate printer as described above, create and print a test file using the fonts, symbols, features, and formats that you use most often. Printing the test file shows you how the printer works with your application program. If the printing results are not what you expect, see Troubleshooting in Chapter 3, or consult your computer or software manual. Note: When you print full resolution graphics (360 x 360 dpi), the result may have a slightly smudged appearance. If this occurs, choose a lower resolution in your application software. 1 - 1 4 Setting Up the Printer