Epson ActionPrinter 3250 User Manual - Page 60

Transporting the Printer, Ribbon Cartridge

Page 60 highlights

Maintenance and Transportation To remove the old ribbon cartridge, first move the print head to the center of the printer. Then remove the cartridge by lifting the posts on either side of the unit. To replace the ribbon cartridge, follow the steps in "Installing the Ribbon Cartridge" in Chapter 1. Transporting the printer If you need to transport your printer some distance, carefully repack it using the original box and packing materials, as described below: 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer. 3. Remove the output guide. 4. Remove the optional push tractor, if installed. 5. Remove the ribbon cartridge. 6. Attach the protective materials to the printer and paper cassette. See page l-3. 7. Repack the printer, ribbon cartridge, output guide, and power cord in the original packing materials and place them in the printer's original box. Using the Printer 3-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103

Maintenance and Transportation
To remove the old ribbon cartridge, first move the print head to the
center of the printer. Then remove the cartridge by lifting the posts
on either side of the unit.
To replace the ribbon cartridge, follow the steps in “Installing the
Ribbon Cartridge” in Chapter 1.
If you need to transport your printer some distance, carefully repack
it using the original box and packing materials, as described below:
1.
2.
3.
4.
5.
6.
7.
Turn off the printer.
Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
Remove the output guide.
Remove the optional push tractor, if installed.
Remove the ribbon cartridge.
Attach the protective materials to the printer and paper cassette.
See page l-3.
Repack the printer, ribbon cartridge, output guide, and power
cord in the original packing materials and place them in the
printer’s original box.
Transporting the printer
Using the Printer
3-15