Epson ActionTower 8200 User Manual - Page 129
Removing a Drive From an External Bay, Disconnect the drive and power cables from the back of
![]() |
View all Epson ActionTower 8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
10. If you have finished installing or removing drives, replace the computer's cover; see "Replacing the Cover" in Chapter 4 for instructions. Then see "Running SETUP" in Chapter 2 for instructions on defining your new drive configuration. Removing a Drive From an External Bay Follow these steps to remove a drive from an externally accessible drive bay: 1. Disconnect the drive and power cables from the back of the drive you are removing. 6-14 Installing and Removing Drives in the Tower Computer
![](/manual_guide/products/epson-actiontower-8000-user-manual-716f320/129.png)
10. If you have finished installing or removing drives, replace
the computer’s cover; see “Replacing the Cover” in
Chapter 4 for instructions. Then see “Running SETUP” in
Chapter 2 for instructions on defining your new drive
configuration.
Removing a Drive From an External Bay
Follow these steps to remove a drive from an externally
accessible drive bay:
1.
Disconnect the drive and power cables from the back of the
drive you are removing.
6-14
Installing and Removing Drives in the Tower Computer