Epson BrightLink 436Wi Installation Guide - Page 27
Route the cables through the arm unit, Attach the wall mount to the wall plate
View all Epson BrightLink 436Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English 3. Route the cables through the arm unit Route the projector's power cord and any additional cables connecting to the projector through the arm unit. q Be sure to also route the cables for any optional equipment (ex. document camera, speakers, etc.) that may be used in the future. Otherwise, each time you need to connect another device, you will need to remove the projector from the mount to connect additional cables. Arm unit Vertical adjustment screw Caution Problems may occur if you use this product without routing the cables through the arm unit. q Route the USB cable so that the type B connector emerges on the projector side. Epson recommends labeling any duplicate cables (ex. USB cables for interactive module [BrightLink 425Wi/430i/435Wi] and USB Display, etc.) so that additional connections can be more easily identified. 4. Attach the wall mount to the wall plate 1. Attach the hook on the arm plate to the bar on the wall plate. 27