Epson CX6400 Quick Reference Guide - Page 35

Running the Head Cleaning Utility, When the message Head cleaning .. disappears

Get Epson CX6400 - Stylus Color Inkjet PDF manuals and user guides
UPC - 013438468694
View all Epson CX6400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

4. After the nozzle check finishes printing, make sure each line is complete, without any gaps or missing dots: If any dots are missing, as shown below, clean the print head as described in the next section. Running the Head Cleaning Utility If you need to clean the print head, follow these steps: 1. Press the Setup button to enter Setup Mode. 2. Press the green button next to the LCD screen until you see Head Cleaning displayed, then press the Color button. The CX6400 runs a head cleaning cycle, and you see the message "Head cleaning . . ." on the LCD screen. Caution: Never turn off the CX6400 while head cleaning is in progress, or you may damage the mechanism. 3. When the message "Head cleaning . . ." disappears, repeat the nozzle check (see page 34) to verify that the print head is clean. If you don't see any improvement after cleaning three or four times, turn off the CX6400 and wait overnight. This lets any dried ink soften. Then try cleaning the print head again the next day. Cleaning the Print Head 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Cleaning the Print Head
35
4.
After the nozzle check finishes printing, make sure each line is complete,
without any gaps or missing dots:
If any dots are missing, as shown below, clean the print head as described in
the next section.
Running the Head Cleaning Utility
If you need to clean the print head, follow these steps:
1.
Press the
Setup
button to enter Setup Mode.
2.
Press the green button next to the LCD screen until you see
Head Cleaning
displayed, then press the
Color
button.
The CX6400 runs a head cleaning cycle, and you see the message “Head
cleaning . . .” on the LCD screen.
Caution:
Never turn off the CX6400 while head cleaning is in progress, or you may damage
the mechanism.
3.
When the message “Head cleaning . . .” disappears, repeat the nozzle check
(see page 34) to verify that the print head is clean.
If you don’t see any improvement after cleaning three or four times, turn off
the CX6400 and wait overnight. This lets any dried ink soften. Then try
cleaning the print head again the next day.