Epson EPL 5800 Reference Guide - Page 69
Warning, Caution, Identify the slot into which the SIMM is to be installed-the
View all Epson EPL 5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
4. Identify the slot into which the SIMM is to be installed-the long slot with the two clips at the ends. Make sure that the clips are open (leaning away from the slot). Clips must be open. This is the slot. w Warning: Avoid touching the electrical components that are exposed after you remove the side cover. Be aware that these components may become hot while the printer is in use. c Caution: Before you install the module, be sure to discharge any static electricity by touching a grounded piece of metal. Otherwise, you may damage static-sensitive components. Chapter 4 Installing and Removing Options 69
Chapter 4
Installing and Removing Options
69
4.
Identify the slot into which the SIMM is to be installed—the
long slot with the two clips at the ends. Make sure that the
clips are open (leaning away from the slot).
w
Warning:
Avoid touching the electrical components that are exposed
after you remove the side cover. Be aware that these
components may become hot while the printer is in use.
c
Caution:
Before you install the module, be sure to discharge any static
electricity by touching a grounded piece of metal. Otherwise,
you may damage static-sensitive components.
This is the slot.
Clips must be open.