Epson PowerLite 5300 User Manual - Page 36
terminal on the square end of the main cable.
View all Epson PowerLite 5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1. Connect the small end of the main cable to the projector's Mouse/Com 1 port. (Use the Mouse/Com 2 port if you are connecting a second computer.) 2. To use the remote control as a wireless mouse, connect the 9-pin end of the PS/2 mouse cable included with the projector to the MOUSE terminal on the square end of the main cable. 3. Connect the 6-pin (mini-DIN) end of the PS/2 mouse cable to the external mouse port on your laptop. Note: If your laptop uses a serial mouse, perform steps 2 and 3 using the PC serial mouse cable instead of the PS/2 mouse cable (not shown in the illustration). 28 1 • Setting Up the Projector
1
•
Setting Up the Projector
28
1.
Connect the small end of the main cable to the projector’s
Mouse/Com 1
port. (Use the
Mouse/Com 2
port if you are
connecting a second computer.)
2.
To use the remote control as a wireless mouse, connect the 9-pin
end of the PS/2 mouse cable included with the projector to the
MOUSE
terminal on the square end of the main cable.
3.
Connect the 6-pin (mini-DIN) end of the PS/2 mouse cable to the
external mouse port on your laptop.
Note:
If your laptop uses a serial mouse, perform steps 2 and 3 using
the PC serial mouse cable instead of the PS/2 mouse cable (not shown
in the illustration).