Epson PowerLite 5300 User Manual - Page 64
again. The fan remains on and the projection lamp light flashes orange
View all Epson PowerLite 5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4. Press the Power button on the remote control or control panel to turn on the projector. The Power light flashes green as the projector warms up. If computer or video equipment is attached, the computer or video signal is projected. Allow about 30 seconds for full illumination. 3 Warning: Never look into the lens when the lamp is on. This can damage your eyes. It is especially important that children not look into the lens. When you want to stop projecting images, press the Power button again. The fan remains on and the projection lamp light flashes orange for about 60 seconds as the projector cools down.When the projector has cooled down, flashing stops. The power light remains orange. Note: If you press the Power button to turn the projector back on while the Power light is orange, there may be a delay before a projected image appears. When you are done using the projector, unplug the power cord. Never unplug the power cord when the power light is green or you may damage the lamp. 56 1 • Setting Up the Projector