Epson PowerLite 5300 User Manual - Page 75
Using the Remote Control, batteries are low. You must also be within
View all Epson PowerLite 5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Using the Remote Control pointer button top multi-purpose button bottom multi-purpose button The remote control uses a line-of-sight infrared signal. To use the remote control, point it towards one of the remote control receivers located at the front and back of the projector. (See page 58.) You can use the remote control up to about 32.8 feet (10 meters) from the projector. (This distance may be shorter if the remote control batteries are low.) You must also be within a ± 30° angle from the front or rear sensor. Controlling the Projector 67
Controlling the Projector
67
Using the Remote Control
The remote control uses a line-of-sight infrared signal. To use the
remote control, point it towards one of the remote control receivers
located at the front and back of the projector. (See page 58.)
You can use the remote control up to about 32.8 feet (10 meters) from
the projector. (This distance may be shorter if the remote control
batteries are low.) You must also be within a
±
30
°
angle from the front
or rear sensor.
bottom
multi-purpose
button
pointer
button
top multi-purpose
button