Epson PowerLite 5300 User Manual - Page 59
with your video source., need to purchase the appropriate cable or use the cable that came
View all Epson PowerLite 5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
To connect a video source to the projector: 1. Turn off the projector and video source if they are on. 2. If your video source uses a small, round, one-prong composite (RCA) video connector, you'll need the audio/video cable that comes with the projector. If your video source uses a large, round, four-prong S-Video connector or a BNC type connector, you will need to purchase the appropriate cable or use the cable that came with your video source. 3. For composite video, connect the yellow RCA plug on one end of the audio/video cable to the projector's Video jack. Connect the other yellow RCA plug to the video-out jack of your video source. audio/video cable Connecting to a Computer 51
Connecting to a Computer
51
To connect a video source to the projector:
1.
Turn off the projector and video source if they are on.
2.
If your video source uses a small, round, one-prong composite
(RCA) video connector, you’ll need the audio/video cable that
comes with the projector. If your video source uses a large, round,
four-prong S-Video connector or a BNC type connector, you will
need to purchase the appropriate cable or use the cable that came
with your video source.
3.
For composite video, connect the yellow RCA plug on one end of
the audio/video cable to the projector’s Video jack. Connect the
other yellow RCA plug to the video-out jack of your video source.
audio/video cable