Epson TM-m50II Technical Reference Guide - Page 105
Paper Specifications, Paper width 58 mm
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Appendix Paper Specifications Paper width 58 mm Paper width 80 mm Paper types Specified thermal paper Form Roll paper Size Roll paper diameter 83 mm {3.27"} maximum Roll paper core Outside: 18 mm {0.71"} Roll width when taken up 58 + 0.5/-1.0 mm {2.28 + 0.02/-0.04"} 80 + 0.5/-1.0 mm {3.15 + 0.02/- 0.04"} Paper width 57.5 ± 0.5 mm {2.26 ± 0.02"} 79.5 ± 0.5 mm {3.13 ± 0.02"} Paper thickness Maximum of 80 μm, minimum of 48 μm Specified original paper type AP45KS-ND, AP50KS-ND P5047(55) KT55FA, KT48FA, KT55PF, KT48PF Jujo Thermal Oy Mitsubishi HiTec Koehler Paper Group • Paper must not be pasted to the roll paper core. • To keep the print quality, it is recommended to change the print densities for each roll paper. See "Software Settings" on page 50. • Use of thermal paper with a pre-printed recording surface should be avoided. Using it can cause the thermal head to stick to the thermal paper surface during printing, and cause printing failure and other problems. The pre-printing also can result in reduced print density. Using thermal paper with a pre-printed recording surface, pre-printing should be done in accordance with the conditions (ink type, printing and other conditions) recommended by the paper manufacturer, and the thermal paper should be checked to ensure that there is no faulty printing, loss of print density, or other problems. 105