Epson TM-m50II Technical Reference Guide - Page 60
Batch rotate print Upside Down, Method for canceling recoverable error, Handshaking Condition for BUSY
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Chapter 3 Advanced Usage Batch rotate print (Upside Down) When the printer is installed so that the paper is ejected frontward, enable this function to print in an easy-toview orientation. • Enable • Disable (initial setting) Method for canceling recoverable error • Command only • Command, and close of the roll paper cover (initial setting) Handshaking (Condition for BUSY) • Receive buffer full/Offline (initial setting) • Receive buffer full In either case above, the printer enters the BUSY state after power is turned on, and when a self-test is being run. Receipt Enhancement You can configure settings such as logo placement when automatically printing a registered logo. Automatic top logo printing • Key code • Justification • Number of deleted lines after top logo printing Automatic bottom logo printing • Key code • Justification Advanced settings for automatic top/bottom logo printing • Print the top logo when paper is fed to the cut position (initial setting: Enabled) • Print the top logo when the printer is turned on (initial setting: Disabled) • Print the top logo when the cover is closed (initial setting: Enabled) • Print the top logo when the buffer is cleared during a recoverable error (initial setting: Enabled) • Print the top logo when feeding paper using the feed button is completed (initial setting: Disabled) 60