Epson TM-m50II Technical Reference Guide - Page 25
About SimpleAP (Wi-Fi Direct), If SimpleAP is restarted in the above state
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 1 Product Overview About SimpleAP (Wi-Fi Direct) • The printer acts as an access point in the SimpleAP mode and allows up to eight devices to connect to the printer. However, devices directly connected to the printer cannot communicate with each other through the printer. • The printer can be connected to SimpleAP and a wireless LAN or a wired LAN at the same time. However, if the printer is already connected to a wireless LAN and setting using the SimpleAP mode is started, the wireless LAN connection is temporarily disconnected. • Do not use 172.16.x.x for the IP address of the wireless LAN and wired LAN because the default IP address of SimpleAP is 172.16.10.1. If used, SimpleAP will be stopped to avoid IP address conflicts. If SimpleAP is restarted in the above state, the initial IP address of SimpleAP will be changed to 192.168.223.1 to avoid IP address conflicts. • Even if you have not changed your passphrase, you may be prompted to enter your passphrase. In that case, enter the serial number of the printer. 25