Epson TM-m50II Technical Reference Guide - Page 114
XON/XOFF, Signal, Printer status, Condition for BUSY, Receive buffer full, Offline
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Appendix XON/XOFF When XON/XOFF control is selected, the printer transmits the XON or XOFF signals as follows. The timing of the transmission varies depending on the conditions configured as BUSY. Signal Printer status Condition for BUSY Receive buffer full Receive buffer full/ Offline XON When the printer goes online after it is turned on (or Transmit after it is reset using the interface) Transmit When the receive buffer is released from the buffer Transmit full state Transmit When the printer switches from offline to online - Transmit When the printer recovers from an error using some ESC/POS commands Transmit XOFF When the receive buffer becomes full Transmit Transmit When the printer switches from online to offline - Transmit Code The hexadecimal numbers corresponding to the XON/XOFF codes are shown below. • XON code: 11H • XOFF code: 13H 114