Epson TM-m50II Technical Reference Guide - Page 119
NFC Tag, Notes on use
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Appendix Notes on use • When you initialize or change the printer settings, the printer is reset to reflect the settings. It may take about 1 minute depending on the network settings or environment. Also, your application may indicate power off during the time waiting for reset. In that case, wait for about 1 minute, and then reconnect to the printer. • In areas where Wi-Fi communication is congested, your application may erroneously recognize that communication is disconnected and indicate power off due to response delay. Also, depending on the combination with the access point used, Wi-Fi communication performance may be degraded. Both of these issues may be improved by disabling the Wi-Fi power saving function (Power Save). However, since the power saving function is disabled, the printer will consume more power. The setting can be changed using Web Config or TM-m50II Utility. NFC Tag Transmission standard Frequency Memory Transmission distance ISO14443 A 13.56 MHz 144 byte Approximately 10 mm from the NFC installation location. • The transmission distance is an estimate that depends on our experiment conditions and is not a guaranteed value. • It varies based on the installation environment and target device. 119