Epson TM-m50II Technical Reference Guide - Page 67
Restore Default Values Mode, To close Software setting mode, turn off the printer
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 3 Advanced Usage 3 After briefly pressing the Feed button (less than one second) for the number of times shown in the print result, hold down the button for more than one second to select the setting items. The setting selected as the setting item, the current settings and initial settings are printed. Depending on the setting item, you may need to continue selecting the setting item before the settings are printed. For details on setting items, see "Software Settings" on page 50. 4 Select a setting by briefly pressing the Feed button (less than one second) for the number of times applicable to the setting, and then hold down the button for more than one second to confirm your selection. After saving the settings, the Software setting mode guidance is printed, and the Paper LED flashes. 5 To close Software setting mode, turn off the printer, or select "Exit" to return to Mode selection guidance, and then select "Exit and Reboot Printer". • To select 0 as the item number, hold down the Feed button until printing starts. • If the button is pressed a number of times that is not displayed by the Setup guidance, the oper- ation is invalid and the same guidance is printed. Restore Default Values Mode In Restore default values mode, following values saved on NV Memory will be set back to initial settings. When any error occurs, you can use to specify the reason. Setting Item Customized Value Memory switch R/E (Receipt Enhancement) settings USB Interface Settings Network settings TM-Intelligent function settings NV graphics NV bit image User defined page User NV memory Restore default settings Restore default settings and Delete definition data Follow the steps below. 1 After running a self test, hold down the Feed button for at least one second to enter the Mode selection. The Mode selection guidance is printed, and the Paper LED flashes. 67