Epson TM-m50II Technical Reference Guide - Page 70

Hexadecimal Dumping Mode, Close the roll paper cover.

Get Epson TM-m50II PDF manuals and user guides View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

Chapter 3 Advanced Usage Hexadecimal Dumping Mode In hexadecimal dumping mode, data from the host device is printed in hexadecimal numbers and characters. By comparing the print outs and the program, you can check whether or not data is being sent to the printer correctly. • When there are no characters that correspond to the print data, " . " is printed. • If you press the Feed button when there is less than one line of print data, one line is printed. • During hexadecimal dumping mode, applications that check the printer status may not operate correctly. The printer only returns the status for the "Real-time transmission status" command. Follow the steps below. Entering the hexadecimal dumping mode is also possible using the ESC/POS commands. 1 Open the roll paper cover. 2 While pressing the Feed button, turn on the printer. (Hold down the Feed button until the Error LED turns on.) 3 Close the roll paper cover. From this point, all data received by the printer is printed in the corresponding hexadecimal numbers and ASCII characters. Example of printing in hexadecimal dumping mode: 4 To close hexadecimal dumping mode, turn off the printer after printing is complete, or press the Feed button for three times. 70

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
70
Chapter 3
Advanced Usage
Hexadecimal Dumping Mode
In hexadecimal dumping mode, data from the host device is printed in hexadecimal numbers and characters.
By comparing the print outs and the program, you can check whether or not data is being sent to the printer
correctly.
Follow the steps below. Entering the hexadecimal dumping mode is also possible using the ESC/POS
commands.
1
Open the roll paper cover.
2
While pressing the Feed button, turn on the printer. (Hold down the Feed button
until the Error LED turns on.)
3
Close the roll paper cover.
From this point, all data received by the printer is printed in the corresponding hexadecimal
numbers and ASCII characters.
Example of printing in hexadecimal dumping mode:
4
To close hexadecimal dumping mode, turn off the printer after printing is complete,
or press the Feed button for three times.
•
When there are no characters that correspond to the print data, “ . ” is printed.
•
If you press the Feed button when there is less than one line of print data, one line is printed.
•
During hexadecimal dumping mode, applications that check the printer status may not operate
correctly. The printer only returns the status for the “Real-time transmission status” command.