Epson TM-m50II Technical Reference Guide - Page 62

Chapter 3 Advanced Usage Setting/Check Modes As well as print mode, the following modes are also provided for making various printer settings and checking items. • Self-test mode • NV graphics information print mode • Receipt Enhancement information print mode • Software settings mode • Restore default values mode • Interface setup mode • TM-Intelligent settings information print mode • Peripheral Device Information print mode • Hexadecimal dumping mode The self-test mode or hexadecimal dumping mode is selected depending on the operation performed when the power is turned on. NV graphic information print mode, Receipt Enhancement information print mode, Software settings mode, and Restore default settings mode are selected depending on the Feed button operation performed during a self-test. Close the roll paper cover, and turn on the printer while pressing the Feed button. Self-test Briefly press the Feed button. Continuing the self-test Hold down the Feed button. Mode selection guidance Press the Feed button once briefly and then hold it down. NV Graphics Information Press the Feed button twice briefly and then hold it down. Receipt Enhancement Information Press the Feed button three times briefly and then hold it down. Software Settings Press the Feed button four times briefly and then hold it down. Restore Default Values Press the Feed button five times briefly and then hold it down. Interface Setup Press the Feed button six times briefly and then hold it down. TM-Intelligent settings information print Press the Feed button seven times briefly and then hold it down. Peripheral Device Information print Open the roll paper cover, and turn on the printer while pressing the Feed button, and then close the roll paper cover. Hexadecimal dumping 62