Epson TM-m50II Technical Reference Guide - Page 43
Setup using Web Config, Necessary Items
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 2 Setup Setup using Web Config Necessary Items Prepare the following items. A device for the setup which has a web browser. When the printer is turned on during the following conditions, the SimpleAP mode is automatically activated and the "SimpleAP Start" sheet and guidance are printed. In this case, start the setup from step 4. • No USB cable is connected • No LAN cable is connected • SSID and passphrase are not set • Wireless LAN unit is connected Setup Procedure 1 Open the roll paper cover of the printer, and then hold down the Feed button until the paper LED starts flashing, then release the button. 2 Close the roll paper cover. A guidance that starts with "Next Action" will be printed. 3 Press the Feed button five times briefly (less than one second each), then press and hold the button for more than one second. "SimpleAP was selected. Release the Feed button." guidance will be printed, followed by a "SimpleAP Start" sheet. 43