Epson WorkForce Pro WF-M5694 User Manual - Page 214

11. On the next Receive Mode Setting screen, select Yes to receive faxes automatically or select No to receive faxes manually. Note: If you connect an external answering machine and select to receive faxes automatically, make sure the Rings to Answer setting is correct. If you select to receive faxes manually, you need to answer every call and operate the product's control panel or your phone to receive faxes. 12. On the Confirm Settings screen, confirm the displayed settings and select Proceed, or press back to change the settings. 13. On the Run Check Fax Connection screen, select Start and follow the on-screen instructions to check the fax connection and print a report of the check result. If there are any errors reported, try the solutions on the report and run the check again. Note: • If the Select Line Type screen appears, select the correct line type. • If the Select Dial Tone Detection screen appears, select Disable. However, disabling the dial tone detection function may drop the first digit of a fax number and send the fax to the wrong number. Parent topic: Setting Up Basic Fax Features Related tasks Entering Characters on the LCD Screen Selecting the Line Type If you connect the product to a PBX phone system or terminal adapter, you must change the product's line type. PBX (Private Branch Exchange) is used in office environments where an external access code such as "9" must be dialed to call an outside line. The default Line Type setting is PSTN (Public Switched Telephone Network), which is a standard home phone line. Note: This setting can be locked by an administrator. If you can't access or change this setting, contact your administrator for assistance. 1. Press the home button, if necessary. 214