Fisher and Paykel DE7027P1 User Guide

Fisher and Paykel DE7027P1 Manual

Get Fisher and Paykel DE7027P1 PDF manuals and user guides View all Fisher and Paykel DE7027P1 manuals
Add to My Manuals
Save this manual to your list of manuals

Fisher and Paykel DE7027P1 manual content summary:

  • Fisher and Paykel DE7027P1 | User Guide - Page 1
    AeroCare clothes dryer Installation instructions and User guide US
  • Fisher and Paykel DE7027P1 | User Guide - Page 2
    WARNING! For your safety the information in this manual must be followed to minimize the risk of fire the gas supplier's instructions. • If you cannot reach your gas supplier, call the fire department. -Installation and service must be performed by a qualified installer, service agency or the gas
  • Fisher and Paykel DE7027P1 | User Guide - Page 3
    INSTRUCTIONS The models shown in this User Guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our local website listed on the back cover or contact your local Fisher & Paykel
  • Fisher and Paykel DE7027P1 | User Guide - Page 4
    dryer and trust it will serve you well for many years. At Fisher & Paykel we aim to provide innovative products that are simple to use, is very important. Located on your dryer and throughout this guide are safety messages and instructions; it is important that you understand and follow them.
  • Fisher and Paykel DE7027P1 | User Guide - Page 5
    harmed while operating your dryer. It is important to always act with caution and use common sense when operating your dryer. Use only as instructed by the User Guide. This is the safety alert symbol. This symbol alerts you to hazards that can present risk of losing life, or hurt you and
  • Fisher and Paykel DE7027P1 | User Guide - Page 6
    ■■ Read all instructions carefully before using this dryer. Use this dryer only for its intended purpose as described in this User Guide. ■■ Installation of the appliance or attempt any servicing, unless specifically recommended in the published user repair instructions that you understand and have
  • Fisher and Paykel DE7027P1 | User Guide - Page 7
    safety instructions 5 the manufacturer of the fabric softener or product. Failure to follow these instructions can result in death or personal injury. To reduce the risk of and venting details in the Installation Instructions. ■■ The interior of the appliance and the exhaust duct should
  • Fisher and Paykel DE7027P1 | User Guide - Page 8
    6 Important safety instructions Safe use of the dryer ■■ Do not allow children to play inside, on, around or with this dryer or wish to dry these items use the drying rack supplied with your dryer. ■■ BEFORE THE APPLIANCE IS REMOVED FROM SERVICE OR DISCARDED, REMOVE THE DOOR. SAVE THESE INSTRUCTIONS
  • Fisher and Paykel DE7027P1 | User Guide - Page 9
    be exposed to water and/or weather. To reduce the risk of severe injury or death, follow all installation instructions. SAVE THESE INSTRUCTIONS Before you begin Read the important safety instructions on the inside cover and on pages 3 - 6 before you start installing the dryer. Check to make sure you
  • Fisher and Paykel DE7027P1 | User Guide - Page 10
    m) long. To the installer Read these instructions completely and carefully. ■■ These instructions must be left with the home owner for an old dryer before it is removed and discarded. ■■ The wiring diagram and service information can be found in the control console. ■■ The Warranty does not cover
  • Fisher and Paykel DE7027P1 | User Guide - Page 11
    9 Unpacking To ensure the best performance from the dryer, please follow the instructions below. WARNING! Excess Weight Hazard Use two or more people to move and install the dryer. Failure to do so can result in back or
  • Fisher and Paykel DE7027P1 | User Guide - Page 12
    10 Installation instructions Location requirements WARNING! Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from the dryer. Place dryer at least 18" (460 mm) above
  • Fisher and Paykel DE7027P1 | User Guide - Page 13
    Installation instructions 11 Minimum clearance required other than alcove or closet exhaust duct is at the rear. Consideration must also be given to provide adequate clearance for proper operation and service. 27" (683 mm) 52 1/2" (1332 mm) 29 1/2" (743 mm) 41 1/2" (1051 mm)* *
  • Fisher and Paykel DE7027P1 | User Guide - Page 14
    12 Installation instructions Requirements for alcove or closet installation Your dryer is approved for installation in an alcove or closet (as specified on the dryer back). WARNING! When
  • Fisher and Paykel DE7027P1 | User Guide - Page 15
    Installation instructions 13 Requirements for alcove or closet installation continued ■■ The closet should be vented to the outdoors to prevent gas pocketing in case of a gas leak
  • Fisher and Paykel DE7027P1 | User Guide - Page 16
    14 Installation instructions Connecting a gas dryer (skip for electric dryer) Refer to page 7 for tools required. Note: installation and service of this dryer must be performed by a qualified installer, service agency or the gas supplier. Gas supply and installation requirements In the Commonwealth
  • Fisher and Paykel DE7027P1 | User Guide - Page 17
    Installation instructions 15 WARNING! To Reduce the Risk of Fire, Electrical Shock and dryer is equipped with a valve and burner assembly for use only with natural gas. Your local service organization can convert this dryer for use with propane (LP) gas, using conversion kit WC254C1258A001. Important
  • Fisher and Paykel DE7027P1 | User Guide - Page 18
    16 Installation instructions Elevation adjustment ■■ The input ratings of gas operated clothes dryers are based on their operation at sea level, and need not be adjusted for operation
  • Fisher and Paykel DE7027P1 | User Guide - Page 19
    Installation instructions 17 Connecting the dryer to the gas supply Gas connection parts Ensure you have the following parts before installing the dryer. New metal flexible gas
  • Fisher and Paykel DE7027P1 | User Guide - Page 20
    18 Installation instructions Connecting to supply Apply pipe compound to all male threads Plugged Tapping Shut-off valve Fig.10 Connecting supply Important! Do not over tighten the
  • Fisher and Paykel DE7027P1 | User Guide - Page 21
    . Use of an approved UL or CSA gas detector is recommended. If a gas leak is detected follow the "What to do if you smell gas" instructions, stated on the inside font cover of this user
  • Fisher and Paykel DE7027P1 | User Guide - Page 22
    result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the appliance is properly adaptor. Do not use an extension cord. Failure to follow these instructions can result in death, fire or electrical shock. The appliance must
  • Fisher and Paykel DE7027P1 | User Guide - Page 23
    Installation instructions 21 Connecting an electric dryer (skip for gas dryers) - in the United States only Refer to page 7 for tools required. Electrical requirements (electric models only)
  • Fisher and Paykel DE7027P1 | User Guide - Page 24
    if the electricity supply does not meet the required specifications. Grounding instructions This dryer MUST be connected to a grounded metal, permanent wiring electric shock. Check with a qualified electrician or service representative if you are in doubt as to whether the appliance is properly
  • Fisher and Paykel DE7027P1 | User Guide - Page 25
    Installation instructions 23 Connecting the dryer using 4-wire connection (must be used for mobile home installation) Note: the National Electrical Code requires that new constructions use a 4-wire
  • Fisher and Paykel DE7027P1 | User Guide - Page 26
    24 Installation instructions Connecting the dryer using 3-wire connection Important! ■■ DO NOT use in Canada. ■■ DO NOT use for Mobile home installations, on new constructions, or on recreational
  • Fisher and Paykel DE7027P1 | User Guide - Page 27
    cord is available, if required. Use of part number 248C1014G001 (240 V cord set) is recommended. Contact Fisher & Paykel Customer Care (refer to page 84). Grounding instructions This dryer MUST be connected to a grounded metal, permanent wiring system. WARNING! Improper connection of the equipment
  • Fisher and Paykel DE7027P1 | User Guide - Page 28
    duct. Do not use a metal foil exhaust duct. Failure to follow these instructions can result in death or fire. ■■ This dryer must be vented to the to the home exhaust duct. The ducting must be installed according to the instructions found in the section "Connecting the dryer to the house vent" (page
  • Fisher and Paykel DE7027P1 | User Guide - Page 29
    Installation instructions 27 Dimensions Exhaust outlet location Exhaust outlet 3 1⁄2" (89 mm) 11 3⁄4" (298 mm) Note: add to vertical dimension the distance between cabinet bottom to floor Fig.
  • Fisher and Paykel DE7027P1 | User Guide - Page 30
    28 Installation instructions Exhaust system setup Hood or wall cap ■■ Ensure the exhaust duct ends with a vent hood with a swing out damper to prevent back drafts and entry
  • Fisher and Paykel DE7027P1 | User Guide - Page 31
    Installation instructions 29 Sealing of joints ■■ All joints must be tightly sealed to avoid leaks. ■■ The male end of each section of duct must be installed away
  • Fisher and Paykel DE7027P1 | User Guide - Page 32
    30 Installation instructions UL-listed flexible metal (foil-type) transition duct ■■ Connecting the dryer to the house vent using flexible metal (foil-type) duct maybe required in some
  • Fisher and Paykel DE7027P1 | User Guide - Page 33
    Installation instructions 31 For transition venting (dryer to wall): DO: Elbows DO cut duct as short as possible and install straight into wall Fig.20 Correct venting
  • Fisher and Paykel DE7027P1 | User Guide - Page 34
    32 Installation instructions Exhaust Length Maximum length of exhaust duct The maximum not exceed 8 feet (2.4 m) in total. The correct exhaust installation is YOUR RESPONSIBILITY. Problems due to incorrect installation are not covered by the warranty. WARNING! Incorrect installation of the exhaust
  • Fisher and Paykel DE7027P1 | User Guide - Page 35
    Preferred 4" (102 mm) Hoods Installation instructions 33 4" Dia (102 mm) 4" Dia (102 mm) Number of 90˚ elbows/bends 0 1 2 3 4 4" (102 mm) When you have a 4" (102 mm) Hood Maximum length of 4" (102 mm)
  • Fisher and Paykel DE7027P1 | User Guide - Page 36
    34 Installation instructions Standard rear exhaust We strongly recommend the use of rigid metal exhaust duct. We recommend you install your dryer first, before installing your washer. This
  • Fisher and Paykel DE7027P1 | User Guide - Page 37
    Installation instructions 35 Dryer exhaust to right, left or bottom of cabinet WARNING! Before performing this exhaust installation, be sure to disconnect the dryer from its electrical
  • Fisher and Paykel DE7027P1 | User Guide - Page 38
    36 Installation instructions Adding shortened duct section Connect portion "A" of the original length of duct to the blower housing, ensuring the shortened duct is aligned with the tab
  • Fisher and Paykel DE7027P1 | User Guide - Page 39
    Installation instructions 37 Adding ducting for exhaust to the right or left side of the cabinet ■■ Assemble a 4" (102 mm) elbow with a with duct tape ■■ Cover the original duct opening at the back with a plate (kit WE1M454), available from Fisher & Paykel, refer to page 84). Fig.29 Cover plate
  • Fisher and Paykel DE7027P1 | User Guide - Page 40
    38 Installation instructions Adding elbow for exhaust through bottom of cabinet ■■ Insert the and ducts. ■■ Cover the original duct opening at the back with a plate (kit WE1M454, available from Fisher & Paykel (refer to page 84). Refer to Figure 29 (page 37). ■■ Move the dryer into its final position
  • Fisher and Paykel DE7027P1 | User Guide - Page 41
    Installation instructions 39 Water connection (for selected models with Steam cycles) Supply requirements The hot and cold faucets MUST be installed no further than 42" (1070 mm)
  • Fisher and Paykel DE7027P1 | User Guide - Page 42
    40 Installation instructions 4 Check that the washer inlet hose (which has been removed from the faucet) has a flat washer or filter washer fitted. If not insert a flat washer
  • Fisher and Paykel DE7027P1 | User Guide - Page 43
    Installation instructions 41 Reversing the door Tools required: ■■ Standard #2 Phillips screwdriver. ■■ Tape-tipped putty knife. ■■ Needle-nosed pliers. 1 Remove the plug from the power outlet. 2 Open the
  • Fisher and Paykel DE7027P1 | User Guide - Page 44
    42 Installation instructions 5 To invert the direction of the door panel, lay the door face down on a safe, protected surface and remove the four screws from the hinges.
  • Fisher and Paykel DE7027P1 | User Guide - Page 45
    Installation instructions 43 8 Reattach the hinges on the opposite side to the door handle, using the same four screws on the hinge retained from removing the hinges
  • Fisher and Paykel DE7027P1 | User Guide - Page 46
    44 Installation instructions Leveling the dryer Position the dryer near the final location. Adjust the four leveling legs (wind up or down) at the corners as needed, to
  • Fisher and Paykel DE7027P1 | User Guide - Page 47
    used is either rigid ducting or thick wall flexible metal ducting. ■■ All joints in the ducting are secured with duct tape, as described in the instructions. Screws or other fastening devices which extend into the inside of the duct should not be used. ■■ Ducting system is clean and is correctly and
  • Fisher and Paykel DE7027P1 | User Guide - Page 48
    46 Installation instructions Additionally for electric dryer models only, check: ■■ Dryer is plugged or directly wired into an odor will diminish with the use of the dryer. Important! Please read the user guide in its entirety and familiarize yourself with the correct use and care of the dryer.
  • Fisher and Paykel DE7027P1 | User Guide - Page 49
    Installation instructions 47 Servicing Important! Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation after servicing/installation. For service and other information, refer to the "How to get service" section in the back of this
  • Fisher and Paykel DE7027P1 | User Guide - Page 50
    , read and follow the IMPORTANT SAFETY INSTRUCTIONS outlined in this User Guide before operating this appliance, pages 3 - 6. Failure to do so can result in death, electric shock, fire or injury to persons. Features Perfect with the Fisher & Paykel AquaSmart™ washer The dryer combined with the
  • Fisher and Paykel DE7027P1 | User Guide - Page 51
    The first time you turn your dryer on 49 Wrinkle Free Use WRINKLE FREE to minimize wrinkling and creasing in your garments. After the clothes are dried, they will be tumbled periodically in cool air. WRINKLE FREE will continue for 24 hours or until the dryer is stopped by pressing POWER, or opening
  • Fisher and Paykel DE7027P1 | User Guide - Page 52
    50 Getting started quickly ■■ Ensure the lint filter has been cleaned before each drying cycle. Check the lint filter has been replaced correctly in its housing before using your dryer. ■■ Sort and load items into the dryer drum. Ensure that no items are caught in the way of the door, then close the
  • Fisher and Paykel DE7027P1 | User Guide - Page 53
    . Take extreme care when removing items as the drum and the load items may be extremely hot. 3 4 Important! Failure to follow the advice in this guide may result in damage to your garments and your expectations of drying performance may not be met. Note: selected drying cycles and options may not
  • Fisher and Paykel DE7027P1 | User Guide - Page 54
    52 AeroCare controls SmartTouch™ Control Dial The SmartTouch™ Control Dial provides easy and efficient drying cycle selection. As you rotate the dial, the icon of the drying cycle selected will be illuminated, along with the default settings for that cycle on the right side of the control panel.
  • Fisher and Paykel DE7027P1 | User Guide - Page 55
    AeroCare controls 53 Keylock Keylock can be used to deactivate the buttons on your AeroCare dryer when it is in use. This will avoid accidental button touches from items left on top of the dryer (eg washing baskets, clothing) as well as touches from any little fingers. To turn Keylock ON or OFF: ■■
  • Fisher and Paykel DE7027P1 | User Guide - Page 56
    54 Sorting and loading When preparing your load there are some important things to consider: Sorting ■■ Check the fabric care labels on the inside of garments to determine whether the item is suitable for tumble drying. ■■ It is best that you sort your garments into loads of similar items, and loads
  • Fisher and Paykel DE7027P1 | User Guide - Page 57
    Sorting and loading 55 Important! ■■ Do not overload your dryer beyond its rated capacity. ■■ Never put dripping wet clothes in or on top of the dryer as excess water may cause an electrical hazard. ■■ Do not under any circumstances dry an electric blanket or any other electrical, plastic or rubber
  • Fisher and Paykel DE7027P1 | User Guide - Page 58
    may not be available for selection under certain conditions and after particular stages of the cycle have passed. Always follow manufacturer's care label instructions when drying your garments. If you are unsure of the temperature to select for a load, it's best to select a cycle with a lower
  • Fisher and Paykel DE7027P1 | User Guide - Page 59
    Dryer cycles 57 Heavy Dryness Level Drying Temp Wrinkle Free Drum Reverse Heavy An extended, high heat cycle designed for heavy fabrics and denims to ensure thick and bulky seams are thoroughly dried. Dry High Off On Delicate Dryness Level Drying Temp Wrinkle Free Drum Reverse Delicate Extra
  • Fisher and Paykel DE7027P1 | User Guide - Page 60
    58 Dryer cycles Bulky A specialized cycle to care for bulky items, eg blankets, jackets, comforters. Bulky Dryness Level Drying Temp Wrinkle Free Drum Reverse Dry Medium Off On The BULKY cycle takes special care of bulky items. Bulky garments and bedding dry most effectively when they can move
  • Fisher and Paykel DE7027P1 | User Guide - Page 61
    Dryer cycles 59 Time Dry Dryness Level Drying Temp Wrinkle Free Drum Reverse Time Dry For clothes that you only want dried for a specific time period. A high heat cycle where the time can be adjusted using the MORE and LESS buttons. n/a* High Off On Note: the dryer dries for the selected time
  • Fisher and Paykel DE7027P1 | User Guide - Page 62
    sensitive, delicate or bulky items. n/a* High, followed by no heat Off On * Dryness level is an option available on automatic sensing cycles only. On manually timed or pre-programed cycles dryness will vary depending on the load and its initial moisture content. Note: if items are still damp at
  • Fisher and Paykel DE7027P1 | User Guide - Page 63
    item that is not described in AeroCare's cycles (refer to pages 56 to 60), refer to the table below. Always remember to follow the manufacturer's instructions (please read the care label of the item). Item Pillows Blankets/throws Plastic, foam rubber, and rubber-backed products Jackets Special
  • Fisher and Paykel DE7027P1 | User Guide - Page 64
    (close the door to assess this) before starting the cycle. Ensure the dry-cleaning product is recommended for use in a domestic dryer. Follow the manufacturer's instructions for how to prepare the load. Set the dryer to the EASY IRON cycle, this cycle uses a medium heat. At the end of the cycle
  • Fisher and Paykel DE7027P1 | User Guide - Page 65
    Drying cycle options 63 Once you have selected your drying cycle you may wish to change the default drying options. Dryness Level Your AeroCare dryer takes the guess work out of choosing drying times by sensing the dryness of the load. When your dryer senses that the clothes have dried to the
  • Fisher and Paykel DE7027P1 | User Guide - Page 66
    64 Drying cycle options Wrinkle Free Select the WRINKLE FREE if you wish to minimize wrinkling. At the end of the cycle, the drum will rotate for 30 seconds every 5 minutes circulating cool air through the load to minimize wrinkling and creasing. This is particularly useful if you cannot remove
  • Fisher and Paykel DE7027P1 | User Guide - Page 67
    Drying cycle options 65 Damp/Dry Signal (selected models only) When your load reaches the DAMP/DRY stage, the dryer will play a musical series of beeps to alert you to remove any items you wish to, and then continue drying until your load reaches the dryness level you selected. This reminds you to
  • Fisher and Paykel DE7027P1 | User Guide - Page 68
    66 Dryer operation Starting a drying cycle Once you have chosen all your desired settings, ensure the door is closed and touch START/PAUSE (located on the right-hand side of the control panel). Stopping your dryer Your AeroCare dryer can be stopped during any stage of the drying process, to allow
  • Fisher and Paykel DE7027P1 | User Guide - Page 69
    ducts Fabric softener sheets If you want to use fabric softener sheets, you must ensure that they are labeled "dryer safe". Always follow the manufacturer's instructions on the packaging. Do not place them in a dryer with warm clothes as there is a chance the fabric softener in the sheet may stain
  • Fisher and Paykel DE7027P1 | User Guide - Page 70
    Medium Low No heat dry symbols Drying cycle we recommend Any cycle REGULAR, HEAVY, ALLERGY EASY IRON, BULKY DELICATE AIR DRY, RACK DRY Additional drying instructions Hang to dry (line dry) Drip dry Dry in shade Dry flat Do not place articles with these symbols in the dryer.
  • Fisher and Paykel DE7027P1 | User Guide - Page 71
    rack when using the RACK DRY cycle. Also use a low temperature (a maximum of MED drying temp can be selected only). To install the drying rack, guide the rack (with the end of the rack with the hooks extending closest to you) into the dryer. Hold the back of the rack up
  • Fisher and Paykel DE7027P1 | User Guide - Page 72
    70 Customizing drying cycles To customize a cycle You can program your AeroCare dryer to remember the drying options you prefer for each drying cycle. For instance, you may want to set the REGULAR cycle to operate the WRINKLE FREE option every cycle, or set the TIME DRY cycle to a lower DRYING TEMP.
  • Fisher and Paykel DE7027P1 | User Guide - Page 73
    Changing pre-set options 71 Changing pre-set options Option Adjustment mode In this mode you can modify the number of beeps that sound at the end of the cycle (ie end of cycle (EOC) beeps), and reset the dryer to the settings it left the factory with (factory reset). Note: DRYNESS LEVEL and DRYING
  • Fisher and Paykel DE7027P1 | User Guide - Page 74
    72 Changing pre-set options End of cycle beeps The beeps signalling the end of the cycle can be set to O (no beeps), 5 beeps or 15 beeps. The default setting is 5 beeps. To modify the number of beeps sounding at the end of the cycle: 1 Enter Option Adjustment mode (refer to page 71). 2 Select the
  • Fisher and Paykel DE7027P1 | User Guide - Page 75
    Caring for your dryer 73 Clean your dryer with a soft damp cloth and wipe dry. Do not use scouring cleaners as they can damage the paint and plastic surfaces. Before you start cleaning your AeroCare dryer, ensure that it is disconnected from the power (ie remove the plug from the power outlet), or
  • Fisher and Paykel DE7027P1 | User Guide - Page 76
    will operate at maximum efficiency. Be sure to replace the lint filter before using the dryer. Important! If the lint filter becomes damaged, contact Fisher & Paykel (refer to page 84) to arrange getting a new filter. Do not operate your dryer with a damaged lint filter or without the lint filter
  • Fisher and Paykel DE7027P1 | User Guide - Page 77
    sharp objects. ■■ Plastic or other combustible ductwork has NOT BEEN USED. Carefully follow the details on exhausting the dryer in the "Installation instructions". Refer to page 26. Ensure that the area around the dryer is kept clear and free from combustible materials, gasoline and other flammable
  • Fisher and Paykel DE7027P1 | User Guide - Page 78
    off and a code will be displayed to inform you what the problem is. To stop the beep sounding, press any button on the control to, try using your dryer normally. If the symptom persists, call your Fisher & Paykel Authorized Service Agent (refer to page 84). Fault codes When a continuous series of
  • Fisher and Paykel DE7027P1 | User Guide - Page 79
    you may encounter when using this appliance and some suggestions that may help to correct the problem. If you still have problems, please contact a Fisher & Paykel Authorized Service Agent. Pressing POWER does not turn on the dryer Is the electrical cord plugged in? If not, plug the cord in. If
  • Fisher and Paykel DE7027P1 | User Guide - Page 80
    78 Solving operating problems Dryer stops working mid cycle Is there a fault code or user warning displayed on the digital display panel? Is the machine beeping? Was there a power
  • Fisher and Paykel DE7027P1 | User Guide - Page 81
    Solving operating problems 79 Dryer is beeping, displaying unfamiliar light patterns and/or a nozzle might be blocked from impurities in the water supply. You may be required call an Authorized Service Agent to replace this. Water visible on inside of door and lint filter after steam cycle Steam
  • Fisher and Paykel DE7027P1 | User Guide - Page 82
    (eg towels, flannelette sheets) dried in your dryer recently? Static problems Have your clothes been over-dried? Select a lower dryness setting. Have item? Check the care labels inside garments. Did you follow the instructions on the care label of clothing for tumble drying correctly? Were delicate
  • Fisher and Paykel DE7027P1 | User Guide - Page 83
    Solving drying problems 81 Tangling Try separating out larger items from smaller items. Load items individually and loosely into the dryer and do not fold the items. Try
  • Fisher and Paykel DE7027P1 | User Guide - Page 84
    warranty, but you must bring the vehicle, boat or mobile facility containing the product to the service shop at your expense or pay the service technician's travel to the location of the product. Fisher & Paykel undertakes to: Repair without cost to the owner either for material or labor any part of
  • Fisher and Paykel DE7027P1 | User Guide - Page 85
    service call will be charged if the problem is not found to be a defect of the product. For example: 1. Correcting faulty installation of the product. 2. Instructing domestic use or 2. Use in accordance with the product's user guide. C Defects to the product caused by accident, neglect, misuse,
  • Fisher and Paykel DE7027P1 | User Guide - Page 86
    84 Limited warranty How to get service Please read your User Guide. If you then have any questions about operating the product, need the name of your local Fisher & Paykel Authorized Service Agent, or believe the product is defective and wish service under this limited warranty, please contact your
  • Fisher and Paykel DE7027P1 | User Guide - Page 87
  • Fisher and Paykel DE7027P1 | User Guide - Page 88
    www.fisherpaykel.com Copyright © Fisher & Paykel 2013. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
US
AeroCare clothes dryer
Installation instructions
and
User guide