Fisher and Paykel DE7027P1 User Guide - Page 66
Wrinkle Free, Delay Start selected models only
View all Fisher and Paykel DE7027P1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
64 Drying cycle options Wrinkle Free Select the WRINKLE FREE if you wish to minimize wrinkling. At the end of the cycle, the drum will rotate for 30 seconds every 5 minutes circulating cool air through the load to minimize wrinkling and creasing. This is particularly useful if you cannot remove the items immediately after the cycle ends. WRINKLE FREE can be selected on any cycle (except ENERGY SAVER, RACK DRY and AIR DRY) and can be turned ON or OFF at any time during the cycle by touching START/PAUSE, then WRINKLE FREE to OFF. WRINKLE FREE will operate for a maximum of 24 hours if not stopped beforehand. To stop WRINKLE FREE at any time touch START/PAUSE, or open the door. You can then remove your items. Touch POWER to stop the cycle and turn the dryer off. Fig.50 WRINKLE FREE option ON After completing each tumble AeroCare will beep to remind you that the load is dry and can be removed. Note: WRINKLE FREE is automatically selected on the EASY IRON cycle. Delay Start (selected models only) The DELAY START option enables you to delay the start of the drying cycle from between five minutes and 18 hours. Time delays you can select are 5 mins, 15 mins, 30 mins, 1 hour, and then hourly up to 10 hours, then for either 12 hours, 15 hours or 18 hours. This can be useful to time your drying to finish when you arrive home from work, or to start when power rates are lower. To program a DELAY START, simply touch the DELAY START option button to select ON, then the MORE button to increase the delay time and LESS button to decrease the time. Touch START/PAUSE to confirm your selection and start the countdown. Once started, the time will countdown on the digital display panel in one minute increments (or one hour increments when the DELAY START time selected is greater than 10 hours). The START/PAUSE light will stop flashing and turn on solid. The dryer will tumble periodically during the delay start countdown. Touch the DELAY START button to turn DELAY START off. To cancel a delay start time once it is counting down, simply touch START/PAUSE, then touch the DELAY START button to select OFF to disable the feature. Touch START/PAUSE to start the cycle immediately. Note: we strongly recommend that you avoid using DELAY START for damp, non-colorfast items as this may cause dye to transfer from one item to another.