Fisher and Paykel DE7027P1 User Guide - Page 20

NEVER use an open flame to test for gas leaks.

Get Fisher and Paykel DE7027P1 PDF manuals and user guides View all Fisher and Paykel DE7027P1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

18 Installation instructions Connecting to supply Apply pipe compound to all male threads Plugged Tapping Shut-off valve Fig.10 Connecting supply Important! Do not over tighten the connections. Test for gas leaks Using two adjustable wrenches tighten all connections Fig.11 Tightening supply connections WARNING! NEVER use an open flame to test for gas leaks. ■■ Turn on the gas (open the gas shut off valve). ■■ All connections should be checked for leaks with a soapy, or equivalent solution. Apply a soap (or equivalent) solution to the connection points. If leaks are found, close the shut-off valve, re-tighten the joint, then repeat the test. Note: Do not use a solution that contains ammonia. This may cause damage to the brass fittings. Open gas valve Fig.12 Testing for gas leaks

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Installation instructions
18
Connecting to supply
Fig.10 Connecting supply
Plugged
Tapping
Shutºoff valve
Apply pipe
compound to
all male threads
Fig.11 Tightening supply connections
Using two adjustable
wrenches tighten all
connections
Important!
Do not over tighten the connections.
Test for gas leaks
WARNING!
NEVER use an open flame to test for gas leaks.
■
±
Turn on the gas (open the gas shut off valve).
■
±
All connections should be checked for leaks with a soapy, or equivalent solution. Apply a soap
(or equivalent) solution to the connection points. If leaks are found, close the shut-off valve,
re-tighten the joint, then repeat the test.
Note: Do not use a solution that contains ammonia. This may cause damage to the brass fittings.
Open gas valve
Fig.12 Testing for gas leaks