Fisher and Paykel DE7027P1 User Guide - Page 44
Remove only the six screws as shown.
View all Fisher and Paykel DE7027P1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
42 Installation instructions 5 To invert the direction of the door panel, lay the door face down on a safe, protected surface and remove the four screws from the hinges. Fig.35 Removing screws from the hinges 6 Separate the door panel from the inside of the door by removing the six screws, as shown in Figure 36. Fig.36 Separating door panel from inside of door Important! Remove only the six screws as shown. 7 Lift and rotate the door panel 180º then reinsert the inside of the door in the panel. Replace the six screws removed in Step 6. Fig.37 Rotating door panel, then replacing screws
42
Installation instructions
5
To invert the direction of the door panel, lay the door face down on a safe, protected surface and
remove the four screws from the hinges.
Fig.35 Removing screws from the hinges
6
Separate the door panel from the inside of the door by removing the six screws, as shown in
Figure 36.
Fig.36 Separating door panel from inside of door
Important!
Remove only the six screws as shown.
7
Lift and rotate the door panel 180½ then reinsert the inside of the door in the panel. Replace the
six screws removed in Step 6.
Fig.37 Rotating door panel, then replacing screws