Fluke Ti200 Manual - Page 32
Spot Temperatures, Spot Markers
View all Fluke Ti200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Ti200, Ti300, Ti400 Users Manual Spot Temperatures The Spot Temperatures are floating HI and LO temperature indicators that move on the display as the temperature measurements of the image fluctuate. To turn on/off the hot and cold spot indicators: 1. Go to Measurement > Spot Temp. 2. Push / to highlight ON or OFF. 3. Push or to set the new value. Note If the Display is set to Display All, you see the information about current transmission correction as τ = xxx%. Spot Markers Up to three adjustable, fixed-temperature spot markers are available on the display. You can use these markers to highlight a region before you save the image. The marker selection is set as All Off, One Marker, Two Markers, or Three Markers. To set a Marker: 1. Go to Measurement > Markers. 2. Push the / to highlight the function between All OFF, One Marker, Two Markers, and Three Markers. 3. Push to set the marker option and go to the "Move Marker" display. You will see the Move Marker icon and the labels on the function buttons change to Done, Next, and Cancel. To change the Marker position on the display: 1. Push to move the Marker location on the image. 2. Push to highlight the next marker. Do Step 1 again. 3. Do Step 2 for a third marker. 4. Push when done. MyFlukeStore S2ho6p for Fluke products online at: www. .com 1.877.766.5412