Foxconn Destroyer English Manual. - Page 40
► OnBoard BCM5788 / BCM5786 Controller
View all Foxconn Destroyer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
► OnBoard BCM5788 / BCM5786 Controller This item is used to enable or disable the onboard LAN controller. ► OnBoard 1394 Controller This item is used to enable or disable the onboard 1394 controller. ► BCM5788 / BCM5786 LAN Boot ROM This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM lets you set up a diskless workstation on the network. By installing a boot ROM in the network board, you can enable a client PC system on the network to be booted remotely. SuperIO Devices Phoenix - AwardBIOS CMOS Setup Utility SuperIO Devices OnBoard FDC Controller OnBoard Serial Port 1 OnBoard IrDA Port IrDA Mode Select IrDA Duplex Mode [Enabled] Item Help [3F8/IRQ4] [2F8/IRQ3] Menu Level ► [IrDA] [Half] 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► OnBoard FDC Controller This item is used to enable or disable the onboard FDC controller. ► OnBoard Serial Port 1 This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port COM1. ► OnBoard IrDA Port This item is used to assign the I/O address and interrupt request (IRQ) for the onboard IrDA port. ► IrDA Mode Select This item is used to configure IrDA port mode: [IrDA]: An IrDA device for maximum baud rate of 115200 bit/s. [ASKIR]: A faster IrDA for 1152000 bit/s. ► IrDA Duplex Mode This item enables you to determine the transfer mode of the onboard infrared chip. 33