Foxconn Destroyer English Manual. - Page 41
► USB 1.1 Controller, ► USB 2.0 Controller, ► USB Operation Mode, ► USB Keyboard Support, ► USB
View all Foxconn Destroyer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3 USB Devices Phoenix - AwardBIOS CMOS Setup Utility USB Devices USB 1.1 Controller [Enabled] Item Help USB 2.0 Controller [Enabled] USB Operation Mode [High Speed] Menu Level ► USB Keyboard Support USB Mouse Support USB Storage Support [Enabled] [Enabled] [Enabled] [Enable] or [Disable] Open Host Controller Interface for Universal ***USB Mass Storage Device Boot Settinf*** S erial Bus. Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults ► USB 1.1 Controller This item is used to enable or disable the Universal Host Controller Interface for USB. ► USB 2.0 Controller This item is used to enable or disable the Enhanced Host Controller Interface for USB. ► USB Operation Mode This item is used to set the USB operation mode. If you select the [High Speed], then the USB operation mode is determined by the USB device; select [Full/Low Speed], the USB device operates on full/low speed. ► USB Keyboard Support This item is used to enable the support for USB keyboard on legacy OS. If you have a USB keyboard, set to enabled. ► USB Mouse Support This item is used to enable the support for USB mouse on legacy OS. If you have a USB mouse, set to enabled. ► USB Storage Support This option is used to set whether the USB Mass Storage controller is enabled in a legacy operating system (such as DOS). ***USB Mass Storage Device Boot Setting*** BIOS auto detects the presence of USB Mass Storage Devices, you can configure the Boot setting mode for the detected USB MSD. Setting Options: [Auto]; [FDD Mode]; [HDD Mode]. 34