Foxconn Destroyer English Manual. - Page 52

OC Gear Phoenix - AwardBIOS CMOS Setup Utility OC Gear OC Gear Item Help Current Storage Gear [Not Use It] x Store My Setting x Restore My Setting Store Restore Menu Level ► x Clear My Setting Clear Choose storage section 1 or 2 or 3 or 4 to Foxconn Function store your over clock Super BIOS Protect [Disabled] setting. If you store Smart Boot Menu [Disabled] your setting to Current Smart Power LED [Enabled] Storage Gear successfully, then the Storage Gear will turn to Green color If you clear the Current Storage Gear successfully, then the color will turn back to normal. 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults OC Gear Current Storage Gear We have more spaces in CMOS to allow you to store up to 8 sets of BIOS configuration data. You can change any setting of BIOS, including the overclocking information, and save the whole BIOS settings to one of eight storage area. Later, you can retrieve BIOS settings by restore it. This item is used to choose storage section to store your BIOS settings. Setting values: [Not Use It]; [Storage Gear 1]; [Storage Gear 2]; [Storage Gear 3]; [Storage Gear 4]; [Storage Gear 5]; [Storage Gear 6]; [Storage Gear 7]; [Storage Gear 8]. ► Store/Restore/Clear My Setting This item allows you to Store/Restore/Clear the BIOS settings. See the help string in "Item Help" table for detail. ********Foxconn Function Super BIOS Protect To protect the system BIOS from virus attack, there is a BIOS write-protection mechanism provided. Super BIOS Protect function protects your BIOS from being affected by viruses, e.g. CIH. ► Smart Boot Menu When PC starts, if [Enabled] is selected, a Boot Menu will be automatically displayed to inform you to select a boot device. If no device is selected, the first device will be used. If [Disabled] is selected, then PC will ask you to press [Esc] key to get into Boot Menu. This setting simplifies multiple boot devices user from pressing [Esc] key to enter boot menu. ► Smart Power LED Smart Power LED is a feature built on your motherboard to indicate different states during Power On Self Test (POST). The LED is located at the front panel, and it displays POST state by different long-short blinking intervals. You can always leave this state enabled. System Status Normal No Memory No Display Post Error Message No CPU Fan Power LED Status Always On Continue blinking On (1sec.), Off (1sec.) Continue blinking On (2sec.), Off (2sec.) Quick blinking twice (1/3sec. On, 1/3sec. Off), one long On (1sec.), continuously. Continue blinking On (1/2sec.), Off (1/2sec.) Stop Blinking Condition Always On Reboot & Memory OK Reboot & Display OK Enter Setup or Skip Reboot & Fan OK 45