Fujitsu 6000NS Operator's Guide - Page 319
Network Connection Troubleshooting, Result, Connection, status, Action
UPC - 097564307195
View all Fujitsu 6000NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 319 highlights
6.3 Network Connection Troubleshooting A results screen similar to the following should appear: Troubleshooting When checking the network connection status of a server by its IP address, the following results are possible. Result Connection status Action "Ping statistics" shows "Lost=0 (0% loss)" OK None "Ping statistics" shows "Lost=4 (100% loss)" NG Check that the ping target IP address is correct. If the ping target IP address is correct, refer to 6 "Failure to connect to a server using its IP address" (page 298) for further solutions. "Ping statistics" shows "Lost=N (1 to 99% loss)" NG There may be a quality problem with the LAN cable. Replace the LAN cable and try again. In "3.6.12 Checking the Network Operating Status" (page 124), change the [Link Speed/ Duplex Mode] from "Auto-Negotiation" to a fixed mode. "Hardware error" NG The LAN cable may have become discon- nected during the Ping test. Check the status of the LAN cable and try again. OK: Connection is operating normally. NG: Connection is faulty. Network Scanner fi-6000NS Operator's Guide 291